Licensed · Bonded · Insured Open 7 daysMon–Sun, 7am–9pmServing the North Bay, Olympia & Seattle
Union Garage Door Repair logo

Side-mount opener for a garage home gym in Santa Rosa, CA

Openers · Santa Rosa, CA

(707) 210-0983 ★★★★★ 5.0 on Google
LiftMaster side-mount garage door opener on the wall beside the door in a Santa Rosa garage gymOpeners
Clear garage ceiling over a home gym after the ceiling opener was removed, Santa Rosa
Open garage door and tracks overhead with no opener rail, Santa Rosa

A tall homeowner turning his garage into a gym needed the ceiling opener gone. We took it out with all its hardware and put a LiftMaster side-mount opener on the wall beside the door.

In the owner's words

The customer called and told us he wanted to convert his garage into a gym. He's a really tall guy, around six foot five, and the ceiling opener was bothering him because he couldn't work out properly.

So we did a conversion to a side-mount opener. We removed the ceiling opener, including all the hardware that was in place, and installed the side mount from zero, a LiftMaster.

The customer was pretty satisfied. His door, which is a very heavy door, is running smoothly.

— Union Garage Door Repair owner, describing the job

!

The problem

The homeowner is about 6'5" and was setting up a home gym in the garage. The ceiling-mounted opener and its rail hung right where he needed room to train.

What we did

  1. Removed the ceiling opener, its rail and all of the old mounting hardware.
  2. Mounted the new LiftMaster unit beside the door and set it up from scratch.
  3. Ran the heavy door through its travel to check it opens and closes smoothly.

The result

The ceiling over the gym is clear, and the heavy door runs smoothly on the new side-mount opener.

Why a side-mount opener fit this garage

A ceiling opener hangs its motor in the middle of the garage and runs a rail from the motor to the top of the door. Here that strip of ceiling sat right over a rack and cable machine, and for someone about 6'5" it was in the way of every overhead movement.

A side-mount unit bolts to the wall at the end of the torsion bar, the steel tube the springs ride on, and turns that bar to raise and lower the door. Nothing hangs from the ceiling, so the space over the gym is open.

What the photos show

  • The new opener: the LiftMaster unit on the wall right beside the door, at the end of the torsion bar.
  • The ceiling after: no motor and no rail, just the lights over the training area.
  • Above the door: the door and its tracks still sit overhead when it's open. Only the opener moved.

Is a side-mount opener right for your garage?

It's worth a look if the garage does more than park a car: a home gym, overhead storage racks, a car lift, or a ceiling you'd just like clear. Three things decide whether it will work:

  • A torsion spring setup above the door, since the opener turns the torsion bar
  • Open wall at one end of that bar for the unit to mount on
  • A power outlet close to where the unit goes

Questions about this job

How is a side-mount opener different from a ceiling opener?

A ceiling opener pulls the door along a rail with a chain or belt. A side-mount opener sits on the wall beside the door and turns the torsion bar directly, so nothing hangs from the ceiling.

Does the old ceiling opener stay in place?

No. Two openers can't share one door, so everything from the old setup was taken down before the new unit was mounted.

Can a side-mount opener run a heavy door?

This was a heavy door, and it runs smoothly on the new opener. On any door we check the spring balance first, because the springs should carry the weight and the opener should only move it.

Similar problem?

Garage Door Opener Repair in Santa Rosa and nearby

Free on-site estimate and a written price before any work starts. Open 7 days, 7:00 AM – 9:00 PM.

Garage door stuck right now?

Call the Sebastopol shop. We answer 7 days a week, 7 AM to 9 PM.

Call now Free quote